how to fix a stuck gear shifter manual


How to Fix a Stuck Gear Shifter Manual

Are you experiencing trouble shifting your manual transmission gear due to the gear shifter sticking? Don’t worry – you can fix this easily and quickly. In this article we will show you how to fix a stuck gear shifter manual and save yourself a trip to the mechanic.

Step 1: Identify the Problem

Before you start trying to fix the gear shifter, you need to determine where the issue is coming from. Check the following possible causes:

  • Broken linkage – This can happen when the linkage between the shifter and transmission has broken or come loose.
  • Stuck cable – A broken or stuck gear shifter cable is another possible cause of the problem.
  • Dirt and debris – If dirt, debris or gunk become lodged inside the shifter or transmission, it can prevent it from moving freely.

Step 2: Fix the Problem

Once you have identified the problem, you can move on to fixing it. Depending on the cause, you may need to do the following:

  • Replace the linkage – If the issue is caused by a broken or loose linkage, you will need to replace it.
  • Adjust the cable -If the problem is coming from a stuck gear shifter cable, you will need to adjust it.
  • Clean out the debris – In order to remove any dirt, debris or gunk, you will need to clean out the shifter and transmission.

Step 3: Test It

Once the problem has been fixed, it is important to test the gear shifter and make sure it is working properly. Make sure to test all gears, as any issues should be noticeable when attempting to switch gears. If the shifter is still stuck, then you may have missed the problem, and should go back to step one and start the process again.

Remember, with a bit of patience and some careful diagnosing you can easily fix a stuck gear shifter manual yourself and keep your car happy and running. Good luck!